Slurry pump with long or double shaft and intermediate bearing. For dry well installation of the pump, the pump hydraulics are sealed on the medium side with a mechanical seal. For wet well installation of the pump, the bearing is sealed on the shaft side by a mechanical seal and the hydraulics on the medium side with a throttle bushing.
This V series benefits from the modular construction of our pump model series. The hydraulic parts of the V series can therefore be designed in models HPK, NPK, NPW and KB and are available as metallic, as well as elastomer-lined pumps.
With this model, the drive shaft is designed as one part. Installation depths up to 2500 mm from the lower edge of the installation plate to the middle of the pump housing can be realised.
This installation type is suitable for wet and dry well installations.
In a model V2, the drive shaft is designed in two parts having an intermediate coupling. Due to this design, installation lengths up to 5000 mm from the bottom edge of the installation plate to the middle of the pump housing is possible.
This installation type is suitable for wet and dry well installation.
Integrated lubrication lines ensure perfect lubrication of the bearings and the shaft seal.
Areas of Application
Tunnel Construction and Civil Engineering
Aerated concrete, Bentonite, cement batching, Chalk slurries, Kaolin, clay, Sand & gravel, Sand industry, Slate, marble, granite, Transport concrete
Ash transport, Coal and coke processing, Condensate, Energy plants & power plants, Flue gas desulphurisation
Beet pulp, Organic slurries, Washing plants, Wastewater treatment plants
Blast furnaces, Closed cooling run process, Cooling water transport, Fire extinguishing pumps, Hot rolling mills, Process water, Sinter and scale deposits
Processing & Mining
Ceramic, glass cut-outs, Chamber filter press loading, Coal/ ore / phosphates / potash/ bauxite, Fe, Zn, Cu, Ti, Salt, Al, etc., Fibrous slurry, Flotation and foam medium, Heavy mining slurries, Iron oxide production, Slurry and sump pumps, Waste recycling
Sand & Gravel
Extraction, Mineral processing, Water retention, Wet processing
Fertilisers, PO4, Foaming suspensions, Pigments, Sediments, soda, Separation, SO4, chloride
- FLOW RATEup to 2,500 m3 / h
- DELIVERY HEAD, SINGLE-STAGEUP TO 60 M.FI.S
- PUMP SPEEDUP TO 1,480 RPM
- CONNECTION SIZESDN32 - DN400
- MAXIMUM OPERATING PRESSURE10 BAR
- NOMINAL DIAMETER500MM, 1800MM
- TEMPERATURE OF THE LIQUID70°C
- DISCHARGE NOZZLE POSITIONANY
- CORROSION RESISTANCE AT PH3 - 14
Click the links below to download product information